Attention: Have 2 pages to see today

Author Topic: 1986 Aquasport 200 Osprey  (Read 407 times)

August 15, 2018, 10:29:59 AM
Read 407 times

David195011

  • Information Offline
  • Posts: 1
1986 Aquasport 200 Osprey
« on: August 15, 2018, 10:29:59 AM »
I have a 1986 Aquasport 200 Osprey.  I keep the boat overboard.  My concern is that when it rains water collects down below the console.  When I stand in the stern the water runs back and the pump activates.  My concern is that the water getting below decks will rot the stringer system.  Does anyone know how the stringers in the boat were installed?  Were the limbar holes glasses to prevent water intrusion.  How much of a problem can this actually be?  Very concerned, Dave

August 15, 2018, 04:11:41 PM
Reply #1

Capt. Bob

  • ***
  • Information Offline
  • Global Moderator
  • Posts: 6435
Re: 1986 Aquasport 200 Osprey
« Reply #1 on: August 15, 2018, 04:11:41 PM »
I have a 1986 Aquasport 200 Osprey.  I keep the boat overboard. 

What does this mean actually?

Does anyone know how the stringers in the boat were installed?

Here's what it looks like under your deck.
https://classicaquasport.com/smf/index.php?topic=13581.msg140104#msg140104

Good luck. :thumright:
]
Capt. Bob
1991 210 Walkaround
2018 Yamaha 150 4 Stroke
"Reef or Madness IV"

August 15, 2018, 10:24:45 PM
Reply #2

wingtime

  • Information Offline
  • Posts: 3581
    • http://50newtmotorclub.shutterfly.com/
Re: 1986 Aquasport 200 Osprey
« Reply #2 on: August 15, 2018, 10:24:45 PM »
The stringers are foam filled fiberglass. All aquasports were self bailing hulls. Water should not be getting below deck at all.
1998 Explorer w/ Etec 250


1987 170 w/ Evinrude 90

 

SimplePortal 2.3.5 © 2008-2012, SimplePortal